HY · Mesh guide

Send messages without internet

With HY Mesh you send text messages to your contacts when there is no Wi-Fi and no mobile signal. A small radio in your pocket does the work. Here you read what you need, how it works, how to set it up and what the app shows you.

Want to know more about the technology? Read the HY blog.

In short

Your phone talks to a small LoRa radio over Bluetooth. That radio sends your message through the air to your contact's radio: directly, or via repeaters. Those are fixed radios on rooftops and other high places that pass messages on.

You simply write in your own chat. With internet, everything works as always. When the internet drops, your text goes over the radio. Once you're back online, everything comes together in the same chat. The whole story is in Chat without internet.

What you need

How it works

  1. You write your message

    In your normal chat. HY encrypts it on your phone, before it even leaves your phone.

  2. Over Bluetooth to your radio

    Your phone hands the encrypted message to the radio in your pocket or bag.

  3. Through the air

    Your radio sends it out. Repeaters pass it on until it reaches your contact's radio. No one along the way can read it: the repeaters only carry encrypted characters.

  4. Delivered

    Your contact's radio passes it over Bluetooth to their phone, and HY makes it readable again there.

How to set it up

Do this at home, with internet. After that it also works on the road without.

  1. Switch your radio on

    Charge it and switch it on. Keep it close to your phone, and make sure it is not connected to another phone or app.

  2. Open the mesh in the app

    Go to Profile and choose “HY Mesh (beta)” under Settings.

  3. Turn the switch on

    Switch on “Use HY Mesh”. Off means: HY as always.

  4. Pair your radio

    Tap “Connect radio” and allow Bluetooth when your phone asks. The app shows the radios nearby, with their signal strength. Tap yours. Does your phone ask for a PIN? A Heltec shows it on its screen, a T1000-E uses 123456.

  5. Check your contacts

    You see “Connected to …” and your radio's battery. Under “Contacts” are the people who also use the mesh. Someone missing? Tap “Refresh contacts”, with internet.

  6. Next time it happens by itself

    The app remembers your radio and reconnects when you open BUBLE. If the connection drops, the app keeps trying by itself.

What you see, and what it means

In a few places, the app shows how your radio and your messages are doing.

On your profile

T1000-E · 78%
Your radio is connected. The number is your radio's battery; at 20% or less it turns red.
Connecting…
The app is connecting to your radio.
Radio not connected
Your paired radio is gone: off, empty or too far away. Tap it to go to the mesh screen.
Without a radio, through a gateway
You use the mesh through a gateway, without a radio of your own.

When pairing

-55 dBm
The signal strength between your phone and the radio. The closer to 0, the stronger: around -50 is excellent, below -90 is weak. Then keep the radio closer to your phone.
Battery behind the name
How full your radio's battery is. A T1000-E has no screen of its own, so this is where you see it.

In your chats

HY behind a name
This person has switched the mesh on and paired a radio. You can reach them over the radio.
No internet. Text goes via HY Mesh; your radio is connected.
You have no internet, but your radio is connected. What you type now goes over the radio.

Under your message

To your radio
Your phone hands the message to your radio.
Sent via HY Mesh
Your radio has sent it out.
At Anna’s radio
It has arrived at your contact's radio.
A gateway has it; it goes to Anna over the internet
A gateway picked it up and delivers it over the internet.
Delivered to Anna
The message has arrived in your contact's app.
Sent over the internet after all
The radio did not work. As soon as there was internet, the message went the normal way.
Not delivered. Anna is probably out of range.
No confirmation came back. Tap “Try again”, or try closer to a repeater or from a higher spot.
No gateway heard. BUBLE sends it over the internet as soon as you have signal.
You sent to someone without a radio, and no gateway picked it up. As soon as you have internet, it goes anyway. Tap “Cancel” to prevent that.

Tap a message for “What happened to your message”: every step, with the time as far as your phone knows it. Whether something was read only shows once you have internet again.

If BUBLE is in the background and a message does not arrive, you get a notification: “Message not delivered”.

Tips for more range

Read more on the HY blog

On the HY blog you can read more about the technology behind the mesh, and which radios you can choose.

All posts on the HY blog →
Say hy, even without signalApp StoreGoogle Play