← All posts

MeshCore and repeaters: top 5 for your pocket and home

Imagine sending messages without a cell tower, without a mobile plan and without depending on wifi. With MeshCore, that is possible. Small radio devices talk to each other over LoRa, and repeaters make sure messages can travel further than a single radio link.

But MeshCore does not have to be cut off from the internet. With BUBLE, HY Messenger and the HY Gateway you get a hybrid approach: a local radio network that can connect to the online world wherever possible.

In this guide you'll learn how MeshCore works, why repeaters matter so much and which five devices are worth a look for your pocket and for your home.

What is MeshCore?

MeshCore is open-source software for communication over small LoRa radios. It is designed to send text messages over long distances using relatively little energy.

In a traditional messaging system, your phone depends on a mobile network or wifi. MeshCore takes a different route: your phone connects to a compatible radio, which can send messages to other devices over radio waves.

That makes communication possible in places without mobile coverage. Think of hiking areas, events, remote locations or situations where the internet connection goes down.

MeshCore is not a magic solution that guarantees range everywhere in the world. You need suitable hardware, other reachable nodes and a good radio link. But you can extend the network yourself, without needing a central telecom provider for the local radio link.

How does a MeshCore repeater work?

A MeshCore network consists of several kinds of devices. The most important are the companion radio and the repeater.

A companion radio is the device you use to send and receive messages. You usually control it over Bluetooth with an app on your phone.

A repeater has a different job. It sits at a fixed or strategic location and forwards suitable messages towards their destination. That lets two users communicate even when they cannot reach each other directly.

This is how it works in practice:

  1. You send a message from your phone through your own LoRa radio (the companion).

  2. A repeater receives the message and passes it on if the route requires it.

  3. Other repeaters may take it over from there.

  4. The message finally reaches the recipient's radio.

A repeater does not need anyone to operate it continuously. With a suitable power supply it can stay active day and night.

What matters is that MeshCore does not simply rebroadcast every packet it receives. It uses routes and specific forwarding rules to keep the network manageable.

Why placement matters more than you think

An expensive radio in a bad spot can perform worse than a simple device in a high, open location.

LoRa signals can cover large distances, but buildings, hills, trees and other obstacles affect the range. That is why a repeater on a roof, in an attic by a well-placed window or on a tall mast is often a good investment.

Pay particular attention to:

  • Height: a clear line of sight often helps more than a small upgrade of the radio.

  • Antenna: use a suitable antenna for the frequency your network runs on.

  • Power: a fixed USB power supply is simple; a battery and solar panel make placement in remote locations possible.

  • Enclosure: an outdoor repeater must withstand rain, moisture and temperature swings.

  • Region: choose the right frequency version for your country and follow the transmission rules that apply.

In the Netherlands, this application generally uses the European 868 MHz band, within the applicable conditions.

BUBLE and HY Messenger: MeshCore and the internet

An interesting difference appears when you combine MeshCore with an internet connection.

A traditional MeshCore network can work locally without the internet. But sometimes you want a message to travel beyond the radio range of your own network.

That is where the HY Gateway comes in.

With the hybrid approach of BUBLE and HY Messenger, you can combine local radio links with a connection to the internet through an HY Gateway. That way radio and internet complement each other, instead of you depending entirely on one of the two.

The idea is simple:

  • Local: devices communicate over LoRa and the repeaters that are available.

  • Through the gateway: where the configuration and connection support it, traffic can use the internet connection to get further than the local radio network.

  • Hybrid: users can benefit from local radio links and online reach.

The HY Gateway is the bridge here. MeshCore itself is not automatically an internet gateway: that needs the additional gateway.

That distinction matters. If the internet goes down, local radio links can keep working as long as the necessary devices are reachable and active. A message that needs the internet bridge to reach a distant online destination obviously cannot reach that destination at that moment.

This combination makes BUBLE and HY Messenger interesting for people who want to experiment with a communication solution that can work both locally and online.

Also read: HY Mesh: encrypts the airwaves too, even via strangers' repeaters

Top 5 MeshCore devices for your pocket

A portable device mainly needs to be compact, have a usable battery and be easy to carry. The list below is a selection of interesting models, not a lab test in which all devices were compared under identical conditions.

1. Seeed Studio SenseCAP T1000-E

Best choice if you want to carry a compact, tracker-style radio.

The SenseCAP T1000-E is about the size of a credit card and weighs around 32 grams. You can easily carry it in a jacket pocket or bag.

The compact design makes it attractive for everyday use. You do not have to carry a large device with a screen and keyboard.

When buying, do check the current MeshCore firmware support and the configuration you need for your use.

2. Nano G2 Ultra

If you are looking for a more capable portable device.

The Nano G2 Ultra is a compact LoRa node that is interesting for users who want more features than a simple tracker offers.

Depending on the version, features such as GPS are available. Check the exact hardware variant and compatibility before you order.

3. LILYGO T-Echo

A compact radio with a screen.

The T-Echo combines LoRa with a low-power e-paper display and GPS. That makes it interesting for users who also want to see information on the device itself.

It is less minimalist than the SenseCAP, but offers more options for standalone use.

4. Heltec Mesh Node T114

For the tinkerer.

The T114 is a compact, low-power basis for a self-built node. With a suitable enclosure and battery you can turn it into a portable solution.

It is mainly a good candidate for users who like to combine parts themselves and adapt their device to their own wishes.

5. LILYGO T-Deck Plus

If you would rather type on a real keyboard.

The T-Deck Plus is a more self-contained device with a screen and a physical keyboard. That lets you write messages without constantly operating your phone.

The device is larger and more expensive than the other options on this list. It therefore suits users who want a portable messenger rather than the smallest possible radio.

Top 5 MeshCore devices for home

A device for home has different priorities. A good antenna, a stable power supply and a favourable position are often more important than a small size.

For this list we look at devices and platforms that are interesting for a fixed repeater. The price depends on the version, antenna, power supply and enclosure.

1. Seeed Studio SenseCAP Solar Node P1 Pro

Best candidate for a ready-made installation in a good location.

The Solar Node P1 Pro is designed for applications where solar power and a self-contained installation matter.

That makes it interesting for a roof, mast or any other place without a power outlet. You have fewer parts to put together yourself than with a fully self-built solution.

When buying, check the exact version and the current MeshCore firmware support.

2. RAK WisBlock RAK4631

A strong basis for an efficient, custom-built repeater.

The RAK4631 is based on the low-power nRF52840 and is part of the modular WisBlock platform.

You can adapt the configuration to your application, for example with a suitable antenna, power supply and enclosure. That makes it attractive for a repeater that has to stay on permanently.

The downside is that you have to decide yourself which parts are needed and how to assemble them safely.

3. Heltec Mesh Node T114

For a compact repeater with low power consumption.

The T114 is also interesting for fixed installations. Its low-power platform makes it suitable for building a repeater that does not use more power than necessary.

With a good antenna and a carefully chosen location, this can be an affordable solution for a local network.

4. Heltec WiFi LoRa 32 V4

An accessible option for an indoor repeater.

This development board is interesting if you want to experiment with a fixed repeater in a place with USB power.

It is a relatively affordable way to get started, for example in the attic or by a window. Keep in mind that an ESP32-based board is generally less suited to long-term use on a small battery than a very low-power platform.

5. Station G2

If you want to build a fixed base for a larger network.

The Station G2 is a candidate for a more permanent installation. It is mainly interesting when you pay attention to the antenna, power supply and location.

Before buying, compare the exact version, supported firmware and available connections. The final performance is determined not only by the device, but also by the conditions at the installation site.

What is the best repeater?

There is no universally best repeater. The right choice depends on what you want to achieve.

If you want to be reachable on the move, a compact device such as the SenseCAP T1000-E is an interesting candidate. If you want to extend the network at home, a low-power development board or a complete repeater installation makes more sense.

If you want to build a network that can communicate both locally and online, the combination with the HY Gateway becomes interesting. It adds an internet connection to the local radio infrastructure.

Do not forget that a repeater only helps if it has a usable radio link to the network. One well-placed repeater can be more useful than several devices that can barely reach each other.

Start small and build from there

You do not have to build a large network straight away. Start with a compatible companion radio and test which devices can be reached in your area. Then add a repeater in a good location and see how the range changes.

When you want more, you can extend the network with extra repeaters and explore the hybrid connection through BUBLE, HY Messenger and the HY Gateway.

MeshCore makes it possible to build your own communication infrastructure. And by combining local radio with an internet gateway, you do not have to choose between fully offline and online only.

That is exactly what makes this hybrid approach interesting: you are building a network that can adapt to the place, the available connection and the way you want to communicate.

Credits

Photo by Pixabay: https://www.pexels.com/nl-nl/foto/time-lapse-fotografie-van-blauwe-lichten-373543/