← All posts

MeshCore: the radio network connecting the world without internet

On rooftops, balconies and in attics all over the world, small radios sit quietly where hardly anyone notices them. Yet together they are building something remarkable: a communication network that doesn't depend on cell towers, mobile plans or an internet connection.

That network is called MeshCore. It keeps growing thanks to thousands of enthusiasts who set up their own equipment and, step by step, build a network that can also work outside the traditional infrastructure.

But what exactly is MeshCore, how does it work and what can you do with it? And how does HY build on this technology?

What is MeshCore?

MeshCore is open-source software that lets small radio devices talk to each other over LoRa. LoRa stands for Long Range: a radio technology that lets you bridge relatively long distances using very little power. It isn't made for large amounts of data, but it works really well for short text messages.

In Europe, this usually runs on the licence-free 868MHz band. Within the applicable rules, you can communicate on it without an individual transmitting licence. A small radio device, often no bigger than a matchbox, is all you need to get started. You connect it to your phone via Bluetooth, and from then on you can send messages without your phone needing any mobile signal itself.

MeshCore appeared at the end of 2024 and is available for free under the MIT open-source licence; the source code is on GitHub. The idea behind it is simple: people should be able to keep in touch when the usual connections aren't available. Think of a power cut, an overloaded mobile network, a natural disaster or a hike far away from civilisation.

How does MeshCore work?

What makes MeshCore special is that not every device does the same job. By splitting up the roles, the network can grow without every device constantly having to forward other people's messages.

Companions: the radio in your pocket

A companion is the radio device you use with your phone. It sends your own messages and receives the ones meant for you. Think of it as the link between your phone and the radio network.

Repeaters: the links in the network

Repeaters sit in fixed locations, for example on rooftops, apartment blocks or hills. They receive messages and pass them on, so they can reach places that are out of direct range of each other. The better the locations and antennas, the larger the area the network can cover.

Room servers: keeping messages

Room servers provide space for shared messages and channels. Depending on the configuration, they can store messages so users can pick them up later. That way they add features that a network made of radio links alone doesn't offer by itself.

How does a message reach the recipient?

Say you want to send a message from Utrecht to someone further away. Your radio might not be able to reach that person directly. Repeaters can then pass the message along, from one location to the next.

MeshCore can learn routes and reuse them. That means not every message has to go through the same search process all over again. This matters, because available airtime is limited. On the European 868MHz band, there are rules on things like transmit power and how long a device is allowed to transmit.

A message can reach its destination over several radio links. How many hops are possible depends on the configuration and the software version in use. The principle stays the same: devices work together to bridge distances that a single radio couldn't cover.

MeshCore is growing worldwide

What started as a technical project has grown into a community of people who want to help build independent communication themselves. On public MeshCore maps, such as the MeshCore Node Map, you can see repeaters in Europe, North America and other parts of the world.

One big reason for the interest is the way MeshCore organises network traffic. Instead of having every device constantly spread every message, the distinction between user devices and fixed repeaters makes it possible to build the network in a more targeted way.

The hardware is accessible too. MeshCore runs on a range of affordable radio devices, including the Heltec V3 and suitable RAK WisBlock configurations. The SenseCAP T1000-E can also be used as a portable LoRa device with the right software support. Which features are available depends on the specific device and its firmware.

So you don't need to design a radio or build a transmitter mast yourself to join in.

From Utrecht to North America

The growth isn't only visible on the world map. Local networks also show what's possible when people install their equipment in good locations.

In the Netherlands, active MeshCore networks have sprung up in several places, including the Randstad. In our own tests, a message from Utrecht travelled over radio links across a distance of roughly a hundred kilometres. That's not a range a single radio covers on its own, but the result of several links in the network.

Large networks have been built in North America as well. In some areas, chains of repeaters connect places that are far apart. Local communities in states like North Carolina are also steadily expanding their coverage.

The real strength lies in the way the network grows. Someone installs a repeater on their roof. Another user does the same a few kilometres away. Together they can connect an area that used to be out of reach.

Every well-placed repeater can help not just its owner, but other users in the area too.

How does HY use MeshCore?

HY is built on the idea that communication shouldn't depend on a single type of connection. That's why HY can use MeshCore alongside your regular internet connection.

This means HY doesn't have to build its own separate radio network. It can plug into the MeshCore infrastructure that users have already set up. So an existing repeater can also add to the radio coverage HY users get, as long as the configuration and protocols in use are compatible.

In practice, you want to notice as little of this as possible. You use HY to chat, and the app makes use of whatever connections are available. When internet is available, a message can be sent over the internet. When there's no internet, the mesh connection can offer an alternative.

You can read more about exactly how that works and what equipment you need in our first blog post about HY and MeshCore.

What does HY add to MeshCore?

MeshCore provides the radio technology that lets devices exchange messages. HY builds on that with a complete chat experience. The goal isn't just to send messages over the radio, but to make communication practical and familiar for everyday use.

1. An extra layer of security for your messages

In a radio mesh, messages may be handled by other people's devices along the way. So you have to keep in mind that you don't know or trust every owner or every device in the network.

MeshCore has its own security mechanisms for messages and communication. HY adds its own security layer on top: messages can be encrypted on the sender's phone with HY's cryptographic keys before they go out over the radio. Only a recipient with the right key can decrypt the content.

This means a repeater along the way doesn't need to know what a message says to help it on its way. The radio network takes care of transport; HY's security layer protects the content.

2. Trusting the right contact keys

Encryption is only reliable if the keys being used really belong to the right people. That's why it's not just the encryption itself that matters, but also how keys are linked to contacts.

HY uses its own contact and key mechanisms for this. That lets the app base a contact's identity on the information that belongs to that contact, rather than only on whatever some random radio device nearby announces.

That's an important difference between a network that lets radio devices talk to each other and a chat app in which you want to talk to specific people.

3. A bridge between radio and internet

One of the limits of a traditional radio network is that both users need access to the radio infrastructure to communicate directly over that network.

HY can push that boundary with gateways: links between the radio network and the internet. A device with the right configuration that can use both the radio link and the internet can pass messages between the two networks.

Say you're somewhere without mobile signal, but your friend at home has internet as usual. If your message reaches a suitable gateway over MeshCore, it can then be sent on over the internet.

The other way round, messages from the internet can reach the radio network through a gateway.

That way, users can reach each other without everyone needing to own a radio or be within direct radio range of each other. Availability naturally depends on the gateways around, the connections and the configuration.

4. One conversation for all your messages

If you use MeshCore alongside a regular chat app, you'd otherwise often have to switch between two apps. One conversation lives in your chat app, the other in the radio app.

HY brings that together. Messages that come in over the mesh can show up in the same conversation as messages sent over the internet.

So you don't have to think first about which connection you're using. You just carry on with the same conversation, with features like groups, reactions, voice messages, photos and calls, as far as the feature in question is possible over the available connection.

There is one practical difference: LoRa has a limited data rate. That makes it mainly suited to short text messages, not to sending large photos or videos directly. Content like that can wait until a suitable internet connection is available again.

That makes HY useful as your everyday chat app and as a fallback when your usual connection drops.

5. Talking to people you know

An open radio channel is handy for sharing information with a larger group, but it's not the same as a private conversation. Depending on the settings, others can receive messages on public channels or try to make contact themselves.

HY is focused on communicating with contacts you've added yourself. Your contact list is the starting point for your conversations, even when messages are sent over MeshCore.

The goal is a mix of reachability and control: the benefits of an open radio technology, without having to hold your everyday conversations on public channels.

The exact level of protection depends on the contact verification, key exchange and message security in use.

Getting started with MeshCore and HY

You can start small. You need a suitable LoRa radio that works with MeshCore, a phone and the HY app.

  1. Download BUBLE for free on your iPhone or Android phone and choose HY when you open it.

  2. Connect a compatible MeshCore radio via Bluetooth, for example a suitable Heltec V3 or SenseCAP T1000-E.

  3. Turn on the mesh feature and check whether you can connect to the existing network in your area.

  4. Want to help extend the coverage? Then consider a fixed repeater in a suitable, high location. A good antenna and a clear position can make a big difference.

Keep in mind that compatibility and available features can vary from radio to radio. HY works with radios running the MeshCore Companion firmware for Bluetooth; tested with the SenseCAP T1000-E and the Heltec V3. You can install that firmware with the MeshCore flasher.

A network built by people themselves

MeshCore shows that communication doesn't always have to depend on big telecom companies or central infrastructure. With small radios, affordable hardware and people who make their equipment available, a network can grow that connects more and more places.

HY builds on that by combining this radio technology with a modern chat app and a connection to the internet whenever one is available.

The result is a different way of looking at communication: not one network that has to do everything, but different connections that complement each other.

A small box on a roof might seem insignificant. But when enough people join in, it can become part of a network that reaches far beyond one house, one city or one country.

HY. Stay connected, even when the internet goes down.

credits

Photo by Masood Aslami: https://www.pexels.com/nl-nl/foto/bezienswaardigheid-attractie-motief-patroon-19429100/