LoRa: what it is, how it works and how to chat with it without internet
Picture yourself at a festival with thousands of people, hiking in the mountains, or stuck at home during a major internet outage. Your phone has no signal. WhatsApp, Signal and other chat apps can't send anything. And yet you need to reach someone.
With LoRa, you can.
LoRa is a radio technology that lets you send small amounts of data over long distances, without Wi-Fi, a SIM card or a mobile operator's cell tower. Combined with a mesh network, devices can pass messages on to each other, so they travel much further than a single direct radio link would allow.
That technology is the foundation of several mesh networks, including MeshCore and Meshtastic. HY Messenger builds on MeshCore and brings it to a messenger you can also just use over the internet.
But what exactly is LoRa? How does this radio technology work, how far does the signal reach, and what's the difference between LoRa, LoRaWAN and a mesh network? And how can you send messages with HY when the internet goes down?
What is LoRa?
LoRa stands for Long Range. It's a wireless radio technology that lets devices send small amounts of information over relatively long distances while using very little power.
LoRa was developed by the French company Cycleo. Chipmaker Semtech acquired Cycleo in 2012 and developed the technology further. Today LoRa lives in small radio chips used for all kinds of things, from smart meters and farm sensors to wireless networks for communicating without internet.
LoRa was originally designed for devices that send little data but need to do so reliably and over long distances. A sensor might only need to report now and then how much water is left in a tank. That doesn't require a fast internet connection.
Those exact qualities also make LoRa interesting for communication between people.
A short text message contains very little data. You don't need a broadband connection for it, but you do need a way to get the message to the person it's meant for. LoRa can provide that link, even when the usual infrastructure isn't there.
There is one important distinction, though: LoRa itself is only the radio technology. To exchange messages between people, you also need software that handles messages and, where needed, forwards them. That's where mesh networks and messengers like HY come in.
How does LoRa work?
A LoRa radio turns digital data into a radio signal. A second radio can receive that signal and recover the original data.
That sounds simple, but LoRa has its own special way of sending information over the air. It lets receivers pick out signals that, with other wireless technologies, would be hard to tell apart from background noise.
Chirps: a radio signal that slides up and down
Many wireless technologies encode information by changing properties of a radio signal. LoRa uses a technique called chirp spread spectrum.
A chirp is a signal whose frequency changes gradually over a short period, sliding up or down within a given frequency range.
The information is encoded in the way these signals are sent. The receiver knows the pattern and can reconstruct the data from it.
The advantage is that LoRa signals hold up relatively well against certain kinds of interference. The receiver can sometimes still detect the recognisable pattern even when the incoming signal is extremely weak.
That doesn't make LoRa immune to interference. Other radio signals, obstacles, interference and poorly placed antennas can still disrupt the connection. But the technique does make communication possible in conditions where you would otherwise need a stronger or faster link.
Spreading factor: more range by transmitting more slowly
LoRa radios can use different settings to balance speed against range. An important one is the spreading factor, usually shortened to SF.
Many LoRa systems use spreading factors from SF7 to SF12. The higher the spreading factor, the longer it takes to send the same amount of data. In return, under good conditions the receiver can pick up the signal from further away.
With a lower spreading factor a message can be sent relatively quickly. With a higher spreading factor the same transmission takes considerably longer.
That has a practical consequence for mesh networks: the longer a message stays on the air, the longer the radio channel is occupied. In a busy network, devices therefore have to be careful with the airtime available.
So LoRa is no replacement for Wi-Fi or mobile broadband. Its strength lies precisely in sending small amounts of information using relatively little energy.
A short text message fits that perfectly. Photos, videos and live video calls are a whole different story.
How far does LoRa reach?
One of LoRa's most attractive features is its range. Where Bluetooth is generally meant for connections over relatively short distances, LoRa can span several kilometres in the right conditions.
The actual range depends on several factors:
Antenna height: an antenna on a roof or hill often gets better range than one at street level.
Obstacles: buildings, hills, trees and other objects can weaken radio signals.
Antenna and transmit power: the antenna, the installation and the permitted transmit settings all play an important role.
Radio settings: things like frequency, spreading factor and receiver sensitivity affect the connection.
Environment: open countryside behaves differently from a densely built-up city.
As a rough guide, you can work with the following distances. They're not guarantees: real-world results can vary a lot.
Environment | Approximate range |
|---|---|
City, at street level | 0.5–2 km |
Open terrain | 2–5 km |
Roof, tower or hill | 10–20 km or more |
In exceptionally favourable conditions much longer distances are possible, for example between mountain tops or with radio equipment at high altitude. Those links aren't representative of everyday use, though.
In a city, antenna height often matters more than simply using more transmit power. That's why a well-placed repeater can make a big difference.
Indoors, conditions can also be disappointing. Modern windows with heat-reflective coatings, for example, can block part of the radio signal. A radio that works fine outdoors may have much less range behind specially coated glass.
For a mesh network, then, it's not just about how far a single radio can transmit. What matters most is how many radios can reach each other and how messages are passed from one radio to the next.
What is a LoRa mesh network?
With an ordinary radio link, two devices have to be able to reach each other directly. A mesh network works differently: devices can have messages forwarded through other devices.
Say you want to send a message to someone who lives five kilometres away. Your own radio may not be able to reach that person directly. But there's another radio on a rooftop that can reach both of you.
That radio can pass the message on. If needed, this happens through several intermediate stations until the message reaches its destination.
How a mesh network works, in short
You send a message. You type a message on your phone. It's sent over Bluetooth to your LoRa radio.
The message is passed on. The radio sends the message over LoRa. One or more MeshCore repeaters can forward it further through the network.
The recipient gets the message. The recipient's radio receives the message and hands it to their phone, where it shows up in the messenger.
This way messages can travel several kilometres without you needing a cell tower or an internet connection. The message only reaches the recipient if there's a usable route through the mesh network.
So a mesh network doesn't necessarily need a central tower or an internet connection. It can work with radios that talk to each other directly.
There are conditions, though. The devices have to be able to reach each other through the network, use the same suitable radio settings and run the right network software. If there's no usable route between two devices, a message won't magically arrive everywhere.
That makes the placement of radios and repeaters important. Every extra repeater can open up new connections and improve the network for other users.
LoRa and LoRaWAN: what's the difference?
Anyone looking up LoRa soon comes across the term LoRaWAN. The names look alike, but the technologies do different jobs.
LoRa is the radio technology. LoRaWAN is a network protocol that uses LoRa.
LoRaWAN was developed for applications such as smart meters, farm sensors and other devices that talk to a network server. It usually works with a star-shaped architecture: devices send their data to one or more gateways, which pass the information on to a central server.
So a LoRaWAN sensor doesn't automatically forward its readings to another sensor. The protocol wasn't designed as a general mesh network in which devices pass on each other's messages.
A well-known example is The Things Network, a community network that started in Amsterdam and lets people use LoRaWAN gateways for sensor applications.
For messages between people without internet, you need a different approach. For that, you can combine LoRa with mesh software that lets devices pass messages to each other.
So LoRaWAN and LoRa mesh networks use related radio technology, but they aren't interchangeable. A LoRaWAN gateway doesn't automatically act as a repeater for MeshCore or Meshtastic.
Which LoRa mesh networks are there?
Several projects let you use LoRa radios for communication outside the usual internet infrastructure. Three well-known names are Meshtastic, MeshCore and Reticulum.
They don't all take the same approach. They differ in things like how messages are forwarded, how routes are determined and what hardware and software you need.
Meshtastic: an easy way to start with LoRa
Meshtastic is a popular open-source project that lets you use cheap LoRa devices for messaging.
You pair a suitable radio with your phone and use the Meshtastic app to send messages. The radios then communicate directly with each other.
By default, Meshtastic uses a form of flooding to spread messages. Devices rebroadcast messages they receive under certain conditions, so those messages can travel further through the network. There are limits, such as a maximum number of hops, to stop messages from circulating forever.
This approach has advantages. You can set up a network relatively easily without configuring extensive routes in advance.
There are downsides too. When many devices rebroadcast the same messages, the load on the radio channel grows. That can become a problem, especially in a busy area, because LoRa can only handle a limited amount of data per second.
Meshtastic is mainly interesting for people who want to experiment with LoRa themselves, set up a local network, or communicate without mobile coverage on a hike or at an event.
MeshCore: making better use of the available airtime
MeshCore goes for a different network architecture. The project distinguishes between ordinary user devices and repeaters that help extend the network.
In a typical MeshCore setup, user devices send their own messages while repeaters pass on messages for others. The software can learn routes to contacts, so messages can be sent in a more targeted way instead of flooding the whole network.
That matters because LoRa's capacity is limited. As a network grows, you don't want every radio constantly rebroadcasting other people's messages.
With a network of well-placed repeaters, messages can travel via several intermediate stations. That lets a relatively small amount of infrastructure cover a larger area.
In the Netherlands, MeshCore is being built and expanded by volunteers. Coverage varies by region and depends on the repeaters in place, antenna positions and conditions. In areas where the network is still thin, one extra repeater can open up new routes.
That makes MeshCore interesting for anyone who wants a mesh network that doesn't just work locally but can also grow along with the number of users and the available infrastructure.
Reticulum: a network that isn't tied to one kind of link
Reticulum is a network stack designed to make communication possible over different kinds of connections.
Besides LoRa, Reticulum can be used over suitable radio links, Wi-Fi and the internet, for example. Its network layer and security features are meant to keep communication from depending on any one specific physical connection.
There are applications such as Sideband and NomadNet that build on Reticulum.
That makes Reticulum attractive for technically minded users who want to combine different networks or set up their own distributed communication infrastructure.
That flexibility also comes with a learning curve. If you mainly want a simple messenger, installation and configuration can be less approachable than with a more ready-made solution.
Meshtastic, MeshCore and Reticulum compared
Feature | Meshtastic | MeshCore | Reticulum |
|---|---|---|---|
LoRa support | Yes | Yes | Yes |
Passing on messages | Flooding as the default approach | Repeaters and route-based routing | Routing within a flexible network stack |
Other connections | Depends on the integration | Depends on the integration | Radio, Wi-Fi and internet, among others |
Interesting for | Easy experimenting | Networks with efficient message delivery | Technically flexible, distributed networks |
None of these projects is the best choice in every situation. The right solution depends on your goal, how simple you want it, the hardware you have and the size of the network.
Can you use LoRa without an extra device?
An ordinary smartphone has no built-in LoRa radio. Your phone's wireless connections, such as Wi-Fi, Bluetooth and mobile data, are not the same as LoRa.
To use LoRa, you therefore need a separate radio device. That device handles the radio communication, while your phone provides the user interface.
Many LoRa devices can connect to a smartphone over Bluetooth. You type a message on your phone, the app passes it to the radio and the radio sends it over LoRa.
The radio on the other end receives the message and passes it on to the recipient's phone.
One advantage of this setup is that you don't need a special LoRa keyboard or complicated controls. You can just use an app.
Depending on the device, the radio can be a small portable unit or a fixed repeater placed on a roof, for example. The latter has a different role: it helps extend the network and doesn't need to be paired directly with anyone's phone.
Which LoRa devices can you use?
There are various suitable devices, from compact portable radios to development boards you can use to build a network yourself.
Two examples are the SenseCAP T1000-E and the Heltec WiFi LoRa 32 V3.
The SenseCAP T1000-E is a compact, portable LoRa radio, well suited to situations where you want to carry a small device with you. The Heltec V3 is a development board with a LoRa radio that you can use to build, among other things, a suitable MeshCore setup.
Which hardware you need depends on what you want to do. Not every LoRa device automatically supports every network protocol. The regional radio frequencies, antenna and software also have to match.
So when buying, check for support for the mesh network you want and for the European radio frequencies. A device designed for another region isn't necessarily suitable for use in the Netherlands.
For everyday use you don't have to design a radio yourself. Mostly you just need a suitable device that works with your messenger.
Which frequencies does LoRa use in the Netherlands?
LoRa works in different frequency bands, depending on the region and the application.
In Europe, many LoRa applications use the 868 MHz band. In North America the 915 MHz band is common, while other regions have their own frequency plans and regulations.
The European 868 MHz band is part of the spectrum in which certain radio devices may operate without an individual transmit licence, provided they meet the applicable conditions.
That doesn't mean you can transmit without limits. There are rules for things like transmit power, the frequencies used and sometimes the amount of time a device may spend transmitting. The exact conditions differ per part of the band and per application. Some equipment, for example, has to respect duty-cycle limits or use techniques to check the channel before transmitting.
That matters for a LoRa mesh network, because all devices share scarce radio capacity. A message that takes a long time on the air keeps the channel busy longer and can delay other messages.
An efficient network therefore tries to cut out unnecessary transmissions. Not just to improve performance, but also to use the available spectrum responsibly.
Is LoRa free?
LoRa itself doesn't require a subscription with a mobile operator. And for direct communication between suitable LoRa radios, you don't need an internet provider either.
You usually pay once for the hardware. Depending on your setup, there may also be costs for things like antennas, power or installing a repeater.
That doesn't mean every conceivable use of LoRa is free. An application that relies on an external server, a paid service or an internet connection can come with extra costs.
But for the actual radio link between two suitable devices, you don't need a paid mobile data plan.
That's exactly what makes LoRa attractive for communicating in remote areas or places without mobile coverage.
How secure is communication over LoRa?
A radio signal can be picked up by other radios within range. That's a fundamental difference from a cable connection: you don't automatically know who's listening in.
That's why you need to distinguish between the radio technology, the mesh network and the security of the messenger you use.
LoRa on its own isn't a complete security solution. Security depends on things like the network software used, the encryption and how keys are managed.
With a well-secured messenger, the content of a message is encrypted before it's sent over the radio. Devices that pass the message along on the way then don't need to be able to read the text.
That's also the approach HY Messenger takes. HY encrypts messages on the phone before they're sent to the LoRa device. So the radios carrying the message along the way never see the readable content.
Managing contact identities and cryptographic keys matters too. A system shouldn't simply trust an unknown radio device that claims to be a certain contact.
With HY, your contacts' keys are fetched from the HY server while you're online. That helps prevent any random device from easily posing as a trusted contact over the radio.
Encryption protects the content of messages, but that doesn't automatically make all metadata invisible. Radio traffic, for example, can still be observed. Which data is visible depends on the protocols and implementation used.
What's the difference between LoRa and Bluetooth mesh?
LoRa isn't the only way to exchange messages without internet. There are also apps that use Bluetooth or Wi-Fi to connect devices directly to each other.
The main difference is range.
Bluetooth is handy for connections between devices that are relatively close together. In a building, on a square or at an event, that can be enough. Range varies a lot by device and environment, but it's usually much shorter than what LoRa can reach in the right conditions.
LoRa, on the other hand, was designed to send small amounts of information over longer distances. A network with strategically placed repeaters can therefore cover an area that would be much harder to reach with Bluetooth alone.
Both approaches have their place. Bluetooth often needs no extra radio hardware, since the phone itself handles the connection. LoRa usually needs a separate device, but offers greater range in return.
For communication over several kilometres, especially when there's no internet, that combination of low power use and long range is particularly interesting.

HY Messenger: using LoRa in your everyday messenger
So far it's mostly been about the technology and the networks. But how do you use LoRa when you just want to send someone a message?
That's where HY Messenger comes in.
HY is a messenger that can work both over the internet and over a LoRa mesh network. Instead of using a completely separate messaging app for the radio network, HY brings mesh functionality to a messenger that's also meant for regular online communication.
HY builds on MeshCore. So it doesn't just use any old LoRa network: it plugs into the infrastructure and routing of the MeshCore network.
That means the available coverage depends on the repeaters and routes present in an area. Where the network has enough connections, messages can reach their destination via several radios. Where there's no usable route yet, an extra repeater can help.
Pairing a LoRa radio with HY
To communicate over LoRa, you pair a suitable MeshCore device with your phone, for example over Bluetooth.
Then you can write your message in HY just like a regular chat message. The app passes the encrypted message to the radio, which can then spread it through the mesh network.
You don't need a SIM card or a Wi-Fi connection for this. Your phone and the radio talk to each other locally.
Over LoRa, the available features are more limited than over the internet, though. The radio technology is meant for short messages, not for sending large files or for conversations with heavy data traffic.
No separate social network needed
An important difference is that HY doesn't treat the mesh as a completely standalone messenger. You don't necessarily have to run a separate messaging environment with its own contact list next to your everyday messenger.
The idea is that you can use the same app when you're online and when you need an alternative route to connect.
That's especially handy when you regularly switch between situations. At home you have Wi-Fi, out and about you use mobile data, and on a hike a LoRa mesh network can save the day.
The mesh is then an extra route for communicating, not a replacement for all your other connections.
What happens when you're back online?
A message sent over a mesh network can be synced later once you're back online. That way your message history in HY can be updated and conversations can be filled in on your other devices.
On top of that, gateways can form a bridge between the radio network and the internet. A gateway is a device that's connected to both the mesh network and the internet. Depending on how it's configured, a gateway like that can pass messages between the two.
This means not everyone who receives a message needs a LoRa radio of their own. Via a gateway, a message can also reach someone using the online version of the messenger, as long as the connection and message handling involved support it.
So a gateway isn't a requirement for all LoRa communication. Two radios can also communicate directly or via repeaters. The gateway adds the option of connecting the mesh network to the internet.
What can you send over LoRa with HY?
LoRa has limited capacity. That's why HY uses the mesh for text messages.
Photos, voice messages and calls that need a lot of data rely on a proper internet connection. Once internet is available again, you can simply keep using HY for those.
That's not a shortcoming you can fix by changing a setting. It's a consequence of what LoRa is: long range and low power use, but a limited data rate.
For short text messages, that trade-off is exactly what makes it interesting. You can send a simple message without depending on the mobile infrastructure.
HY doesn't turn LoRa into faster internet. It makes communication possible via a different route when the internet isn't available.
HY's mesh feature is currently being field-tested in the Netherlands. What's actually possible depends on the available MeshCore coverage and the hardware used.
Frequently asked questions about LoRa
Is LoRa legal in the Netherlands?
Yes. Suitable LoRa devices may be used without an individual transmit licence as long as they comply with the applicable European and Dutch regulations. That covers things like the permitted frequencies, transmit power and any limits on transmit time.
Do you need internet to use LoRa?
No. Two suitable radios can communicate directly or exchange messages via repeaters without an internet connection. You do need internet for features that rely on an online server or gateway.
How far does LoRa reach?
Range depends on the antenna, the environment, the radio settings and the obstacles between the devices. A few kilometres is achievable in the right conditions. With antennas placed high up, the range can be considerably greater.
Can you make calls or send photos with LoRa?
LoRa isn't suitable for normal phone calls, video calls or sending large photos. Its data rate is too limited for that. It's mainly suited to short text messages and small amounts of data.
What do you need to chat over LoRa?
You need a suitable LoRa radio, a phone with compatible software and a network that can carry the messages. For HY, that means a compatible MeshCore device, such as a suitable portable radio, that you can pair with your phone.
Does LoRa work when the mobile network goes down?
Yes, as long as there's a usable radio link or mesh route between the devices involved. LoRa doesn't need a mobile operator's cell tower. Coverage does depend on the radios and repeaters available.
Is LoRa the same as MeshCore?
No. LoRa is the radio technology used to send data. MeshCore is software and network functionality that lets suitable radios exchange messages over a mesh network.
Which is better: Meshtastic or MeshCore?
That depends on your goal. Meshtastic is popular for easy, hands-on experimenting and uses flooding by default to spread messages. MeshCore uses an architecture in which repeaters and learned routes play a key role. For larger networks, that can make more efficient use of the available airtime. The best choice depends on local coverage, hardware and the features you want.
Does LoRa cost money per message?
With direct communication between suitable radios, you don't pay a mobile operator anything per message. Usually the only cost is buying the hardware. Any additional services or internet connections may come with costs, though.
How long does a LoRa radio's battery last?
That varies by device, battery capacity, transmit settings and usage. LoRa can be very energy-efficient, but a device that sends messages often or runs as a permanent repeater uses more power than a radio that's only used now and then.
Conclusion: LoRa makes communication possible outside the internet
LoRa is a radio technology that lets you send small amounts of data over long distances without depending on a mobile operator or Wi-Fi.
Combined with a mesh network, the technology gets even more interesting. Radios can pass messages on to each other, making communication possible across larger areas than a single direct link could cover.
Projects such as Meshtastic, MeshCore and Reticulum show how LoRa can be used for different kinds of communication. Each project makes its own choices in network architecture, routing and ease of use.
HY Messenger builds on MeshCore and brings LoRa to a messenger that also works over the internet. You can send messages over the mesh network whenever a usable route is available, and keep using the regular online features as soon as you're connected again.
That doesn't make LoRa a replacement for the internet, but an extra way to stay reachable.
Want to know more? Also read Chat without internet: how HY's mesh works and find out how HY Messenger uses mesh technology to send messages outside the usual internet infrastructure.
Credits
Photo by cottonbro studio: https://www.pexels.com/nl-nl/foto/mensen-telefoon-smartphone-verbinding-8088688/
Photo by Ron Lach : https://www.pexels.com/nl-nl/foto/telefoon-smartphone-kind-jongen-9783823/